WHY USE IT?

Our remote monitoring and control system has countless uses and advantages:

Remote Control...
This makes life so much easier and can give peace of mind knowing you can make quick changes if and when required.

By knowing quickly if a piece of equipment has failed, this makes maximum use of maintenance staff and a quick response can sometimes save system major restart problems. For example this could reduce the risk of flood damage if a drainage pump failed or reduce risk of livestock dying from cold if heating fails

Having up to date fault reports in the screens enables maintenance managers to fully know their work loadings such as what has failed. Making the most efficient use of staff dramatically improves customer service by having an engineer on site sometimes even before the customer knows there is a problem!

Energy Managers...
Energy managers can use a portable test case system to measure what they need to know and then take the case to another site and decide if the potential economies are worth making changes. Altneratively, installing permanent monitoring systems. All case mounted systems include GPS to ensure that its location is known at all times.

Commissioning Engineers...
Commissioning engineers are always overloaded and are looking for ways to reduce time travelling to site. Being able to know the urgency of going to a particular sie can dramatically reduce overheads together with improving customer service. Further, getting charts of selected parameters are always very helpful in getting the best out of the system and being able to prove the system complies with the specification.

Maintenance Managers...

Maintenance Managers can both reduce the number of site visits or go having better information about what has gone wrong, enabling them to send the suitable engineer. Companies with planned maintenance contracts where the system was not large enough to have a full BMS with telementary can have this system added to vital equipment. When under pressure, it can make all the difference if a planned visit can be deferred.

Production Engineers...
Production engineers who often only work day shifts want to know what is happening with the system. Out of normal working hours helps to give advice to on duty staff by being able to see what is happening on site or making changes over the system.

Farmers...

Farmers have equipment, livestock and greenhouse crops in many remote locations. Failure of this equipment can be expensive and cause risk to chickens, piglets and other animals. This equipment can monitor your valuable assets provided you have a mobile phone signal; it can be wind or solar powered if necessary.

Alternative Energy...
Alternative energy is a fantastic help but knowing how well it is working is essential. With remote monitoring it is possible to receive, record and monitor such information as the electricity produced, wet energy and how wind speed is affecting things. Until recently this type of equipment has been only been available for large systems, our system allows it to be economic for smaller situations.

Vending Machines, etc...
Vending machines, pin tables, ticket machines and other equipment with limited fault signals can be directly connected to the Blue Java box. This can perform multiple tasks such as inform of low stock levels, jammed mechanisms, full coin boxes, etc. They can also transit location information as well as any faults. Let us know what you need to know!

Crouzet M3 logic controllers are easy to program. We are more than happy to supply the java box and monitoring site if required and can also provide training to get you started at just £200 per half day at Bognor Regis.

Contact us today to find how we can help you save money, be more efficient and keep your customer happy!